 |
| |
|
|
TUBULAR & D SHAPE HEATERS
For
Air, Water, Oil, Gas & Chemical Heating And For Shell Moulding Machines. |
|
|
|
|
 |
MICA
BAND HEATERS
CONSTRUCTION : Design consists of Nichrome resistance rbbon proecisely wound, evenly spaced on a Inorganic Mica Sheets which eliminates hot spot. Our exclusive Computer Softwate designing maximize the element ribbon coverage of the heated area, which results in uniform heat distribution. The resistance ribbon is carefully selected considering all aspects in the application to obtain maximum life of the heater. This ribbon wound mica foemer and insulated with mica sheets, which is then covered with SS/Brass sheets.
Specification and Tolerances :
ELECTRICAL
Wattage :±5%
Voltage : 230 Volts / 415 Volts.
DIMENSIONAL
Minimum Dia : 25mm
Minimum Width : 20mm
Width tolerance : ±2mm
Std. gap between Clamps : 5-8mm
• Most Economical • Faster Heating up and Cooling Down possible
APPLICATIONS
These heaters are suitable to apply heat by conduction to cylindrical surfaces-Injection & Blow Molding M/cs, Extruders, Dies, Drum Heating. |
 |
ENERGY SAVING CERAMIC & MICA BAND HEATER
This is a superior design to save powr up to 30%. The Energy saving is achieved by using 2" thick ceramic wool blanket insulation from the outer surace of the heater. The overall outer diameter increases by 4". The low thermal conductuvity of the ceramic biber keep the outher surface temperature up to 60° to 80° C, Which reduces heat losses to atmosphere.
• Reduce Electricity Bill • Reduce Power Load
ADVANTAGES
• Saving in energy up to 30%
• Uniform Heating
• Reduced preheating time of machine
• Cool Working atmosphere
• Increases productivity
|
| |
|
|
 |
CERAMIC BAND HEATERS
CONSTRUCTION : Ceramic Band Heater consist of a helically wound resistance coil made from Nichrome 80/20 wire, evenly stretched and precisely strung through a steatie insulating bricks forming a flexible heating mat. The Ceramic heating mat along with 6 mm thick ceramic fiber insulation is assembled in S. S 304 sheet with serrate edges providing maximum flexibility for easy installation.
Specification and Tolerances:
ELECTRICAL
Wattage : : ±5%
Voltage : 230 Volts / 415 Volts.
Max. Temperature : 750 c
DIMENSIONAL
Minimum Dia : 30mm
minimum Width : 25mm
Width tolerance : ±2mm
Std. gap between Clamps : 5-8mm
• Higher Watt Density • Higher Operating TYemperature
• Higher Productivity
APPLICATIONS
These heaters are sutable to apply heat by conduction to cylinderical surfaces-Injection Moulding M/cs, Plastic & Rubber Extrudgers, Dies, Drum Heating, Blow Moulding M/cs. |
|
|
|
|
STRIP
HEATERS
For
Oven Rubber Moulding Machine,
Air Conditioning Plants.
|
|
|
|
|
BOBBIN
HEATERS
For Oil, Water, Chemical Heating
|
|
|
|
|
CARTRIDGE
HEATERS
For Die Heating of Plastic, Rubber & Packaging Machines in
SS, Brass Tubes |
|
|
|
|
FURNACE
HEATING ELEMENT
Manufactured
From Kanthal & Nichrome Wires,
Strips as Per Sample
or Specifications. |
|
|
| Next |
| Designed by : MID Hosted by : PBD Promoted by : GID |
|
|
|