|
|
STSRIP HEATERS & PLATE HEATERS
| TYPE |
LENGTH |
WIDTH |
THICK |
FIXING HOLE SCEN TO CEN |
WATTAGE AT 230 V |
STRIP HEATERS STANDARD (REFRACTORY INSULATED) |
| SH-15 |
380 MM |
38 MM |
9.5 MM |
355 MM |
600 W |
| SH-18 |
457 MM |
38 MM |
9.5 MM |
432 MM |
750 W |
| SH-21 |
533 MM |
38 MM |
9.5 MM |
508 MM |
850 W |
| SH-24 |
610 MM |
38 MM |
9.5 MM |
585 MM |
1000 W |
| SH-30 |
762 MM |
38 MM |
9.5 MM |
735 MM |
1500 W |
| SH-36 |
915 MM |
38 MM |
9.5 MM |
890 MM |
2000 W |
STRIP HEATERS FOR PANEL BOARD |
| SH-09PB |
228 MM |
38 MM |
9.5 MM |
203 MM |
60W / 40W |
| SH-09PB |
229 MM |
38 MM |
9.5 MM |
203 MM |
100 W |
| SH-12PB |
305 MM |
38 MM |
9.5 MM |
280 MM |
100W / 60W |
| SH-12PB |
305 MM |
38 MM |
9.5 MM |
280 MM |
250 W |
| Heaters can be manufactured as per coustomer's requirements. |
FINNED STRIP HEATERS
Basically Finns of sizes 65 mm x 35 mm are fitted tightly
on the Heavy Duty Strip Heaters for fast transfer of
heat to flowing air.
|
1) MICA STRIP / PLATE HEATER Nichrome ribbon wound on mica former & insulated with mica sheet. which is then sheathed in MS Plated or SS sheet.
|
2) CERAMIC / REFRACTORY Heating Coil supported in Fluted Refractory insulators and
sheathed in SS /MS Plated sheets. These heaters ate provided
with screw terminals and holes on either end for mounting.
PLATE / STRIP HEATER
|
APPLICATION Best Suitables For Uniform Heat Transfer to Flat Surfaces.
Rubber Moulding M/c. Hot Plates
|
|
|
LENGTH |
3/8" O.D. |
1/2"O.D. |
5/8"O.D. |
3/4"O.D. |
7/8"O.D. |
1"O.D. |
1.1/4"O.D. |
| |
WATTS |
WATTS |
WATTS |
WATTS |
WATTS |
WATTS |
WATTS |
| |
STD. |
MAX |
STD. |
MAX |
STD. |
MAX |
STD. |
MAX |
STD. |
MAX |
STD. |
MAX |
STD. |
MAX |
2.5 |
100 |
130 |
135 |
180 |
170 |
220 |
205 |
265 |
240 |
310 |
275 |
350 |
340 |
440 |
3 |
125 |
160 |
165 |
210 |
205 |
265 |
245 |
320 |
290 |
370 |
330 |
425 |
410 |
530 |
4 |
165 |
210 |
220 |
280 |
275 |
350 |
330 |
425 |
385 |
495 |
440 |
565 |
550 |
705 |
5 |
205 |
265 |
275 |
350 |
340 |
440 |
410 |
530 |
480 |
615 |
550 |
705 |
685 |
885 |
6 |
250 |
320 |
330 |
425 |
410 |
530 |
495 |
635 |
575 |
740 |
660 |
845 |
825 |
1060 |
8 |
330 |
425 |
440 |
565 |
550 |
705 |
660 |
845 |
765 |
990 |
880 |
1130 |
1100 |
1410 |
10 |
410 |
530 |
550 |
705 |
685 |
880 |
825 |
1060 |
960 |
1235 |
1100 |
1410 |
1375 |
1765 |
12 |
495 |
635 |
660 |
850 |
825 |
1060 |
990 |
1270 |
1155 |
1485 |
1320 |
1695 |
1650 |
2120 |
18 |
740 |
955 |
990 |
1270 |
1235 |
1590 |
1485 |
1905 |
1730 |
2225 |
1975 |
2540 |
2470 |
3180 |
24 |
990 |
1270 |
1320 |
1695 |
1650 |
2120 |
1975 |
2540 |
2305 |
2965 |
2635 |
3390 |
3295 |
4240 |
Heaters can be manufactured as per customer's requirements. |
|
• Wattages are given at 230 Volts. Heaters can be manufactures in any Voltages.
• Heaters cab be manufactured in any minimum Wattage.
• Heaters can be made in outer diameter grounded for close sfitting into the holes.
• Heaters can be manufactured in other diameters.
• Heaters can be provided with Fibre glass/Teflon Silicon wire or sleeves in any length.
|
|
WE EXPERTISE IN :
• Distibuted Watt Density Cartridge Heater • Built In Sensor Cartridge Heater
|
Construction : Brass of SS tubes sheath, Nichrome resistance wire helical coil evenly stretched and strung through a steatite insulator, high purity magnesium oxidepowder filled in remaining space inside the tube & insulator to increase thermal condustivty, dielectric strength and life.
APPLICATIONS : Dies, Moulds, Platens, Plastic Injection & Extrusion Die Head,
Packaging & Heat Sealing M/c.
|
|
|
CAST - IN - HEATERS
CONSTSRUCTION
Tubular heating elemets embede in aluminium alloy or Brass, providing uniform heat transfer and long life. The heater can be manufactured with cooling tubes for accurate temperatures control.
Suitable for temperatures up to :
Aluminium : 400° C Max
Brass : 600° C Max
APPLICATIONS
Widely used in Extrudes, Laminating equipments, Injection moulding Vacuum forming & packaging machines, Extrusion die heads & gear pimps, Compression moulding, Heat sealers, Food processing, Pharmaceutical packaging machines Rubber Presses.
Additional Treatment Such As Teflon Coating, Heat Treatment Can Done |
|
Cast Heater Advantages
• High Thermal Conductivity -Fast heat Tranfer
• Exceptionally Long Life.
• Accurate Temperatujjre Control.
• A leakage in the machines not affects the life |
|
|
|
|
BOBBIN HEATERS
CONSTRUCTION
Open helical coils of high resistance wire evenly stretched and lay through fluted refractory bobbins. These heating elements are than inserted into 1 1/2" or higher diameter metal pipes which are welded to liquid tanks.
APPLICATION
For heating large quantities of liquid and water solutions, alkali, fuel, oil, transformer oil, mineral and vegetable oils, chemicals, Plating solution tanks
|
|
|
|
|
SS / TITANIUM HEATERS
CONSTRUCTION : Made from SS / TITANIUM tubing woth replaceable Bobbin Type heatng elements inside, provided with mounting plate and terminal box.
APPLICATIONS
• Titanium - For vertical use for Nitric and Chromic acid olution.
• SS- 304 - Alkaline solution
• SS 316 - Phosphating Solution.
SILICA HEATERS
CONSTRUCTION :
Made of improted fused silica tubing with removable heating elements Inside provided with heat resistant
rubber cap and a connectiong cable.
APPLICATIONS :
For vertical iuse at higher temperature in all acides,
ferric chlorideetching
Baths anodizing, bright dip baths,
except hydrofluoric and phosphoric.
|
|
|
| DIA & LENGTH |
RATING |
HOT LENGTH |
COLD LENGTH |
| Dia :38 MM, 450 MM LENGTH |
1000 W, 230 V |
300 MM |
150 MM |
| Dia :38 MM, 600 MM LENGTH |
2000 W, 230 V |
450 MM |
150 MM |
| Dia : 38 MM, 750 MM LENGTH |
3000 W, 230 V |
600 MM |
150 MM |
| Dia : 38 MM, 900 MM LENGTH |
4000 W, 230 V |
750 MM |
150 MM |
| Standard sizes for SILICA/SS/TITANIUM Heaters. |
| Heaters can be manufactured as per customer's requirements. |
|
|
|
| Back/Next |
| Designed by : MID Hosted by : PBD Promoted by : GID |
