|
|
| |
 |
 |
 |
 |
CERAMIC / REFRACTORY |
 |
| Heating Coil supported in Fluted Refractory insulators and sheathed in SS /MS Plated sheets. These heaters ate provided with screw terminals and holes on either end for mounting. |
| |
| APPLICATION : Best Suitables For Uniform Heat Transfer to Flat Surfaces. Rubber Moulding M/c. Hot Plates |
| |
| REQUEST A QUOTE |
|
|
| |
LENGTH |
3/8" O.D. |
1/2"O.D. |
5/8"O.D. |
3/4"O.D. |
7/8"O.D. |
1"O.D. |
1.1/4"O.D. |
|
WATTS |
WATTS |
WATTS |
WATTS |
WATTS |
WATTS |
WATTS |
|
STD. |
MAX |
STD. |
MAX |
STD. |
MAX |
STD. |
MAX |
STD. |
MAX |
STD. |
MAX |
STD. |
MAX |
2.5 |
100 |
130 |
135 |
180 |
170 |
220 |
205 |
265 |
240 |
310 |
275 |
350 |
340 |
440 |
3 |
125 |
160 |
165 |
210 |
205 |
265 |
245 |
320 |
290 |
370 |
330 |
425 |
410 |
530 |
4 |
165 |
210 |
220 |
280 |
275 |
350 |
330 |
425 |
385 |
495 |
440 |
565 |
550 |
705 |
5 |
205 |
265 |
275 |
350 |
340 |
440 |
410 |
530 |
480 |
615 |
550 |
705 |
685 |
885 |
6 |
250 |
320 |
330 |
425 |
410 |
530 |
495 |
635 |
575 |
740 |
660 |
845 |
825 |
1060 |
8 |
330 |
425 |
440 |
565 |
550 |
705 |
660 |
845 |
765 |
990 |
880 |
1130 |
1100 |
1410 |
10 |
410 |
530 |
550 |
705 |
685 |
880 |
825 |
1060 |
960 |
1235 |
1100 |
1410 |
1375 |
1765 |
12 |
495 |
635 |
660 |
850 |
825 |
1060 |
990 |
1270 |
1155 |
1485 |
1320 |
1695 |
1650 |
2120 |
18 |
740 |
955 |
990 |
1270 |
1235 |
1590 |
1485 |
1905 |
1730 |
2225 |
1975 |
2540 |
2470 |
3180 |
24 |
990 |
1270 |
1320 |
1695 |
1650 |
2120 |
1975 |
2540 |
2305 |
2965 |
2635 |
3390 |
3295 |
4240 |
Heaters can be manufactured as per customer's requirements. |
|
| |
• Wattages are given at 230 Volts. Heaters can be manufactures in any Voltages.
• Heaters cab be manufactured in any minimum Wattage.
• Heaters can be made in outer diameter grounded for close sfitting into the holes.
• Heaters can be manufactured in other diameters.
• Heaters can be provided with Fibre glass/Teflon Silicon wire or sleeves in any length. |
| |
WE EXPERTISE IN :
• Distibuted Watt Density Cartridge Heater
• Built In Sensor Cartridge Heater
Construction : Brass of SS tubes sheath, Nichrome resistance wire helical coil evenly stretched and strung through a steatite insulator, high purity magnesium oxidepowder filled in remaining space inside the tube & insulator to increase thermal condustivty, dielectric strength and life.
APPLICATIONS : Dies, Moulds, Platens, Plastic Injection & Extrusion Die Head,
Packaging & Heat Sealing M/c. |
|
 |
 |
 |
 |
|
|
|
|
|
CAST - IN - HEATERS
|
 |
CONSTSRUCTION :
Tubular heating elemets embede in aluminium alloy or Brass, providing uniform heat transfer and long life. The heater can be manufactured with cooling tubes for accurate temperatures control.
|
Suitable for temperatures up to :
Aluminium : 400° C Max
Brass : 600° C Max |
APPLICATION : Widely used in Extrudes, Laminating equipments, Injection moulding Vacuum forming & packaging machines, Extrusion die heads & gear pimps, Compression moulding, Heat sealers, Food processing, Pharmaceutical packaging machines Rubber Presses.
Additional Treatment Such As Teflon Coating, Heat Treatment Can Done |
Cast Heater Advantages
• High Thermal Conductivity -Fast heat Tranfer
• Exceptionally Long Life.
• Accurate Temperatujjre Control.
• A leakage in the machines not affects the life |
| REQUEST A QUOTE |
 |
|
|
|
|
|
|
|
|
|
|
|
|
SS / TITANIUM HEATERS |
 |
CONSTRUCTION : Made from SS / TITANIUM tubing woth replaceable Bobbin Type heatng elements inside, provided with mounting plate and terminal box.
APPLICATIONS
• Titanium - For vertical use for Nitric and Chromic acid olution.
• SS- 304 - Alkaline solution
• SS 316 - Phosphating Solution.
SILICA HEATERS
CONSTRUCTION :
Made of improted fused silica tubing with removable heating elements Inside provided with heat resistant rubber cap and a connectiong cable.
APPLICATIONS :
For vertical iuse at higher temperature in all acides,
ferric chlorideetching Baths anodizing, bright dip baths,
except hydrofluoric and phosphoric.
|
| REQUEST A QUOTE |
|
|
DIA & LENGTH |
RATING |
HOT LENGTH |
COLD LENGTH |
Dia :38 MM, 450 MM LENGTH |
1000 W, 230 V |
300 MM |
150 MM |
Dia :38 MM, 600 MM LENGTH |
2000 W, 230 V |
450 MM |
150 MM |
Dia : 38 MM, 750 MM LENGTH |
3000 W, 230 V |
600 MM |
150 MM |
Dia : 38 MM, 900 MM LENGTH |
4000 W, 230 V |
750 MM |
150 MM |
Standard sizes for SILICA/SS/TITANIUM Heaters. |
Heaters can be manufactured as per customer's requirements. |
|
|
|
|
|
|
|
| Back || Next |
|
|
